|
Performance
■
Multi-function: AFM, LFM, STM, Conductive AFM, MFM and EFM;
■ Multi-Mode: Contact Mode, Tapping Mode, Phase Imaging and Lift Mode;
■ SPM in liquid and Enviornmental Control SPM;
■ Real-time temperature and humidity detecting;
■ Force Analysis: I-V Curve, I-Z Curve, Force Curve and Amplitude Curve;
■ Nano-Processing and manipulating: Lithography Mode and Vector Scan
Mode;
■ Fast automatically tip-engaging
■ Simply change the tipholder to switch between STM and AFM;
■ Full digital control, auto system status recognition;
■ Ajustable lightening inside
■ With a 32-bit Digital Signal Processor (DSP) from Texas Instruments,
4.8 billion times of calculation per second can be achieved;
■ Controller and Computer connected through a 10M/100M Fast Ethernet;
■ Large sample size: up to φ45mm, 30mm thick;
■ Online Control Software and offline Image Processing Software for
Windows;
■ Trace-Retrace scan, Back-Forward scan;
■ Online real-time 3D image;
■ Automatically Brightness and Contrast refresh;
■ Data can be loaded out for further analysis;
■ Nano-Movie function: Continuous data collection, storage and replay;
■ Multi-Analysis: Granularity and Roughness;
■ Tip Estimation and Image Re-construction;
■ Modularized design for convenience of maintenance and future upgrade;
■ Second display monitor and optical microscope system attachable;
Specifications
• Functions
Atomic
Force Microscope (AFM) which has full coverage of Contact Mode, Tapping
Mode, Phase Imaging and Lift Mode;
Lateral Force Microscope (LFM);
Scanning Tunneling Microscope (STM);
Conductive AFM, SPM in liquid, Enviornmental Control SPM;
Nano-Processing System including Lithography Mode and Vector Scan
Mode;
• Resolution
AFM: 0.26nm lateral, 0.1nm vertical;
STM: 0.13nm lateral, 0.01nm vertical;
• Technical Parameters
Current Sensitivity: ≤10pA;
Force Sensitivity: ≤5pN;
Image Pixels: 128×128, 256×256, 512×512, 1024×1024, 2048×2048;
Scan Angle: 0-360° adjustable;
Scan Rate: 0.1-100Hz adjustable;
Pre-setting Tunneling Current: 0.001-10nA Bias: -10-+10V;
Temperature Sensitivity: 0.1℃, Humidity Sensitivity: 0.5%RH
• Electronics
CPU:
32-bit Digital Signal Processor (DSP) at 600MHz from Texas Instruments;
DAC: 20 channels of 16-bit DAC;
ADC: 20 channels of 16-bit ADC;
Communication Interface: 10M/100M Fast Ethernet;
• Mechanics
Sample Size:
Up to 50mm×50mm, 30mm thick;
Engagement: Auto engagement with travel distance of 30mm and
precision of 50nm
• Softwares
Online Control
Software and offline Image Processing Software for Windows
Vista/XP/2000/9x;
|
